Walther reg tuner identification...

Discussion in 'Walther' started by RobF, Aug 10, 2014.

  1. RobF

    RobF Administrator Staff Member

    Joined:
    Mar 4, 2010
    Messages:
    12,178
    Location:
    Poole, Dorset
    Club:
    Parkstone Gun Club, South Dorset FTC, Southampton Buccaneers
    Got a few regs here and trying to work out who has done them...

    One reg has PD and a date and pressure marked on outer face, so assuming that's Pete Dutton ;)

    Another has just a pressure marked, Nick Murhpy?

    Another has a neat printed date and pressure on silver tape, Mike Williams?

    And another had nothing, but inside when the reg was cracked open, a pressure marked on one 1/2 of the parts, inside... no idea...
     
  2. mikewills8904

    mikewills8904 walthers last the course

    Joined:
    May 13, 2009
    Messages:
    919
    Location:
    porttalbot
    Club:
    oaktree ftc and tondu ftc
    Regs

    Rob
    I normally put a printed tape in the underside of anti have done
    And usually write inside with permanat marker
     
  3. Gcos

    Gcos Member

    Joined:
    May 19, 2010
    Messages:
    354
    Location:
    The Land of the Prince Bishops
    Club:
    Thorn Dell ( RIP )
    Rob , just as well you are trying out a Steyr, if you need all those Regs to keep you up and running with a Walther.
     
  4. cwprice

    cwprice Member

    Joined:
    Dec 7, 2009
    Messages:
    188
    Location:
    northampton
    walther reg

    Hi Rob
    I had a new reg from Bills Walther spares in Sussex quite a while ago and that had the pressure written on it.
     
  5. RobF

    RobF Administrator Staff Member

    Joined:
    Mar 4, 2010
    Messages:
    12,178
    Location:
    Poole, Dorset
    Club:
    Parkstone Gun Club, South Dorset FTC, Southampton Buccaneers
    I wouldn't speak too soon Gerard... i'm looking for a spare reg for the steyr and a reg checker, and a seal set and a knock open valve, all in time for this week's swefta round... it's been a fun week... think cured one issue only to find another!...

    Harry has been good though, got a part sub 24 hours.

    These regs are ones I've had for spares, and someone elses...
     
  6. hmangphilly

    hmangphilly The Doctor

    Joined:
    Nov 5, 2013
    Messages:
    2,173
    Location:
    wimborne
    mate
    I expect you're all over this but just a heads up

    --------------------------------------------------------------------------------

    I had a power variation on my LG110 and returned the reg to Harry. After a thorough investigation he suggested the problem was the hammer spring as the reg seemed ok. He sent me a replacement spring with my reg which i received the next day.
    Gun is now perfect and there was no charge not even postage. You can not get a better service than this.
    Thank you very much Harry and Steyr UK.
    __________________
    G Cane Steyr LG110 04087 + Leupold 20x50x50
    Air Arms FTP 900 130717 + Leupold 20x50x50


    while youre at it, whats the conventional wisdom on the steyr hammer ....dry or lubed ?
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice