Walther lg300 parts delivered to the uk?

Discussion in 'Walther' started by BruceGill, Jun 7, 2014.

  1. BruceGill

    BruceGill New Member

    Joined:
    Aug 18, 2012
    Messages:
    192
    Location:
    Bishops Stortford
    Club:
    Springfield ARC
    Hi guys

    Hope someone can help.

    Judith Billharz seems to have the most complete list of parts. Do they deliver to the uk? The website doesn't give you an option of putting "UK" into the delivery address.

    Is there anywhere else with such a good list of parts?

    I'm after a few hammer pins, a probe pin, a few orings and washers.

    Cheers
    Bruce
     
  2. Ceathreamhnan

    Ceathreamhnan WHFTA Champion 2013

    Joined:
    Nov 14, 2011
    Messages:
    770
    Location:
    Stirling
    Club:
    Dunfermline
    I've had correspondence from them to say that they will, if you email them with your needs they can send you an invoice to prepay.
     
  3. tim g

    tim g Member

    Joined:
    Nov 28, 2008
    Messages:
    68
    Location:
    Banbury
    Club:
    North Oxon
    Walther bits

    You could try the NSRA shop at Bisley first. If they have the parts they are very quick:

    http://www.nsrashop.co.uk/

    T
     
  4. BruceGill

    BruceGill New Member

    Joined:
    Aug 18, 2012
    Messages:
    192
    Location:
    Bishops Stortford
    Club:
    Springfield ARC

    Great! Not thought of them. Many thanks :)
     
  5. hmangphilly

    hmangphilly Not quite a full phil

    Joined:
    Nov 5, 2013
    Messages:
    1,885
    Location:
    wimborne
    which o ring s do you need chum?
     
  6. BruceGill

    BruceGill New Member

    Joined:
    Aug 18, 2012
    Messages:
    192
    Location:
    Bishops Stortford
    Club:
    Springfield ARC
    I'm just making a list up for a full set.... Looking at the drawing online they give you sizes so can hopefully get most from my local hydraulics shop.

    Can't find a list of sizes anywhere?
     
  7. john0neuk

    john0neuk Well-Known Member

    Joined:
    May 18, 2014
    Messages:
    1,249
    Location:
    Ivybridge
    Club:
    Dartmoor Marksmen
    I found Paul at BSW Sales in Bisley area very helpful. He is a Walther importer but can source parts and sells them out through the NSRA shop at Bisley as can't deal direct with Joe public.
    Re the o rings - I did similar with my Walther Dominator 1250, sourced all locally v cheap but unfortunately the Walther ones seem to be made of a different material - sizing is easy getting the right "slippiness" is the hard part. I was working inside the regulator which is I fear tolerance "picky"!
     
  8. hmangphilly

    hmangphilly Not quite a full phil

    Joined:
    Nov 5, 2013
    Messages:
    1,885
    Location:
    wimborne
    Main ones you'll need are
    4x 1 for probe
    9x 1.5 for barrel 2 off
    Nitrile seems fine
     
    Last edited: Jun 8, 2014
  9. BruceGill

    BruceGill New Member

    Joined:
    Aug 18, 2012
    Messages:
    192
    Location:
    Bishops Stortford
    Club:
    Springfield ARC
    Perfect. Thanks mate
     
  10. hmangphilly

    hmangphilly Not quite a full phil

    Joined:
    Nov 5, 2013
    Messages:
    1,885
    Location:
    wimborne
    I sent pm let me know if you don't get it .
    Ithink I ve come over all in competent
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice