Sticky cocking mech

Discussion in 'Walther' started by 5teve L, Dec 15, 2014.

  1. 5teve L

    5teve L STOP ! HAMMER TIME !

    Joined:
    Apr 16, 2009
    Messages:
    1,158
    Location:
    Horsham, West Sussex.
    Club:
    The Oaks & Horsham hawks
    The cocking lever seems to feel a little stiff at the moment on my Dommie, it's had a few soakings & wipe downs, is there anywhere I need to lubricate & if so what do I use ??
    (oddly the actual cocking lever seems ok externally)

    cheers
    Steve
     
  2. sven

    sven Member

    Joined:
    Dec 11, 2009
    Messages:
    253
    Location:
    Arnhem, The Netherlands
    Club:
    FT Schalkhaar / SSV Ons Genoegen
    Hi Steve,
    It could be the pellet probe and / or the cocking mechanism and / or the hammer.
    In the stickies above is a guide to disassemble the Dominator, and also one on my blog www.airgunaccuracy.WordPress.com underwalther dominator tuning. https://airgunaccuracy.wordpress.com/walther-lg300-dominator-tweeking-and-tuning/
    I use molykote grease for the cocking links and plates. Feinwerkbau Spezialgleitfett for the probe, because I have it and it safe for o-rings. No grease on the hammer.

    Good luck,
    Sven.
     
  3. 5teve L

    5teve L STOP ! HAMMER TIME !

    Joined:
    Apr 16, 2009
    Messages:
    1,158
    Location:
    Horsham, West Sussex.
    Club:
    The Oaks & Horsham hawks
    Thanks Sven, probe is probably the culprit by the sounds of it as it's shooting spot on, I will see if I can find something suitable to use.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice