Shiny precioussssss

Discussion in 'Walther' started by Feral, Jul 22, 2009.

  1. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    I was toying with the idea of replacing the shroud on the dominator with a carbon fibre one but Dave was coming down to pick his computer up so offered to give it a polish... he also reshaped the chopped down barrel band to get rid of the worked edges and angles to make it nice and curved. Caustic soda refused to get the anodising off so Dave did the business with sandpaper and wet n dry (over 3 cups of coffee went into that reshaping!).

    Thanks for sorting it Dave, looks fantastic... and thanks Luke or the cakes they were excellent!


    I'll post some pics up later so get your shades ready ;-)
     
  2. Kingplinker

    Kingplinker " Horsham HFT champion 2010 "... apparently...

    Joined:
    Apr 16, 2009
    Messages:
    679
    Location:
    Sussex
    LOL

    My pleasure Cliff , it came up a treat didn't it ... I hope you do the before and after pics . :D

    PC is fine mate and Luke can't wait to get home from school to play on the disney channel for the next few hours !

    Many thanks , glad you like the gun :)

    Dave

    PS : Cheers for the coffee Linn , Cliffs cuppa tasted like he had milked the cat :eek:
     
  3. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    Guilty as charged ;-)
     
  4. Kingplinker

    Kingplinker " Horsham HFT champion 2010 "... apparently...

    Joined:
    Apr 16, 2009
    Messages:
    679
    Location:
    Sussex
    Thats fine , I'm quite partial to a nice drop of rat pi$$ :D

    I am now thinking of polishing the MPR barrel as I did with the s400 :eek:

    atvb

    Dave
     
  5. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    Here you go Dave, looking blingy :D:

    Before:

    [​IMG]

    After barrel band reshaping:

    [​IMG]

    After shroud polishing:

    [​IMG]

    Bloomin cheap and strudy stand offs to create a hamster


    [​IMG]
     
  6. Scooby

    Scooby Pete Dutton

    Joined:
    Nov 8, 2008
    Messages:
    2,619
    Location:
    Rotherham
    The front scope mount shouldn't really be attached to the remnants of the original extension rail as it's only held on by two small 3mm roll pins, ideally you need to bring the mount back & use the action block itself
     
  7. Mog

    Mog New Member

    Joined:
    Apr 17, 2009
    Messages:
    251
    Location:
    Lower Normandy
    Club:
    Truttemer Tir Club
    Shouldn't have told him that Pete, you've now removed yet another excuse for missing. :D:D:D
     
  8. Scooby

    Scooby Pete Dutton

    Joined:
    Nov 8, 2008
    Messages:
    2,619
    Location:
    Rotherham
    I'm sure he had plenty ready for use anyway:D
     
  9. tres vintes

    tres vintes New Member

    Joined:
    Feb 13, 2009
    Messages:
    39
    Location:
    Porto, Portugal

    Thank you :)
     
  10. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    Well spotted Pete, sorted now thanks... and as for your Mister Charles I am still working my way through chapter three of "Mog's excuse compendium 2009"


    and while I was busy typing my UK Neil bits turned up and I can start using the dommy properly :D:D:D

    [​IMG]
    [​IMG]
     
  11. Scooby

    Scooby Pete Dutton

    Joined:
    Nov 8, 2008
    Messages:
    2,619
    Location:
    Rotherham
    From one of the Photo's in your earlier post you appear to have the shroud extending past the barrel, is your new silencer now fixed to the shroud then ??? As this could cause problems, Ideally any MFC or silencer should be fixed to the barrel
     
  12. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    Pete the shroud has holes drilled through for the silencer adapter so although it pushes over the shroud it is fixed to the barrel by grub screws, the eventual plan is to go for a shorter cylinder so I can reduce the whole thing by the length of the spigot plus a bit more at which point I'll get a smaller adapter and cut the shroud back to accommodate but the funds aren't there at the moment for any new toys :(
     
  13. Kingplinker

    Kingplinker " Horsham HFT champion 2010 "... apparently...

    Joined:
    Apr 16, 2009
    Messages:
    679
    Location:
    Sussex
    Cliff , I have a junior hacksaw mate :eek: IIRC you took a pic before the shroud was pushed all the way in ;)

    atvb

    Dave
     
  14. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    Ahh sorry I just re-read Pete's post... your right Dave Dom2.JPG was taken was before I'd pushed it all the way home... I was scared to touch it as you kept frowning everytime I looked at it in case my eyes left retinal prints or somesuch ;-)
     
    Last edited: Jul 22, 2009
  15. Kingplinker

    Kingplinker " Horsham HFT champion 2010 "... apparently...

    Joined:
    Apr 16, 2009
    Messages:
    679
    Location:
    Sussex
    Did you notice every time I thought you were going to finger it :eek: I was ready with the kitchen roll . lol

    My greatest post of all time surely :D

    Dave
     
  16. Mog

    Mog New Member

    Joined:
    Apr 17, 2009
    Messages:
    251
    Location:
    Lower Normandy
    Club:
    Truttemer Tir Club
    You two should really get a room. :cool:
     
  17. Kingplinker

    Kingplinker " Horsham HFT champion 2010 "... apparently...

    Joined:
    Apr 16, 2009
    Messages:
    679
    Location:
    Sussex
    Don't be so disgusting Charles , with Cliff's chest stubble and my somewhat receding number 1 hairline it would be like two benders fighting in a velcro factory :D:D:D

    Dave ( I need help don't I ) :eek:
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice