S400 MPR Service & Set Up

Discussion in 'General Airgun Chat' started by Swills, Jul 24, 2013.

  1. Swills

    Swills New Member

    Joined:
    Jul 23, 2013
    Messages:
    7
    Location:
    Alton
    Club:
    BFTO Bisley
    Hi

    I'm relatively new to this game and having picked up a 2nd hand S400 MPR have com to the conclusion that the general consensus is that it isn't worth getting a regulator fitted.

    There are recommendations instead to get the rifle serviced and set up correctly.

    Can anyone advise on where/who I should get this done by.

    Thanks in advance.
     
  2. harrier2

    harrier2 New Member

    Joined:
    Apr 17, 2012
    Messages:
    12
    Location:
    chester
    mpr service

    Staffordshire custom rif
    les
     
  3. 5teve L

    5teve L STOP ! HAMMER TIME !

    Joined:
    Apr 16, 2009
    Messages:
    1,158
    Location:
    Horsham, West Sussex.
    Club:
    The Oaks & Horsham hawks
    Very easy to work on if the anti tamper is removed, the A/T is fairly easy to remove as well if you are careful.

    All you really need to do is strip it, clean & polish the hammer rail & firing pin so they run smoothly, you can fine tune the firing pot as well if you have time & patience, if not 57mm is about right with the older style brass pot.. The triggers are better if you add the little crinkle washers instead of the o-rings & polish the sears a little.
     
  4. Topher

    Topher Member

    Joined:
    May 13, 2011
    Messages:
    83
    Location:
    Eastbourne
    Club:
    The Oaks, Brighton
  5. Fasterthansid

    Fasterthansid New Member

    Joined:
    Oct 1, 2012
    Messages:
    46
    Location:
    Stoke on trent
    As mentioned above go see dave at scr air ries in stoke if your not happy doing it yourself. I did mine a couple of months ago and it's bloody lovely again now.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice