HW100 in .25

Discussion in 'Weihrauch' started by rickysdaystate, Dec 8, 2012.

  1. rickysdaystate

    rickysdaystate Make Every Shot Count

    Joined:
    May 3, 2010
    Messages:
    322
    Location:
    Atherstone
    Club:
    Greyhound
    Can these be converted to.25 cal? im thinking there might not be room in the mag to drill it out?
     
  2. wyn

    wyn New Member

    Joined:
    Feb 4, 2011
    Messages:
    9
    Location:
    Cardiff
    A .22 magazine for an HW100 only has 0.75mm between each pellet so it would probably need a new mag machining.
    A new mag would hold about 12 'ish pellets...i don't know whether there would be problems with the indexing mechanism not rotating the mag far enough.

    The rest should be pretty straight forward but would also need an o-ring fitted to a larger pellet probe as the original space for the o-ring in the casting will be machined away.

    The pellet probe and casting behind the barrel were the bits i had to work on when i changed a .177 HW100 up to .20 so very similar to going up to .25.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice