hammerli reg

Discussion in 'General Airgun Chat' started by tisme, Dec 6, 2011.

  1. tisme

    tisme New Member

    Joined:
    Oct 17, 2011
    Messages:
    14
    Location:
    Matfield
    Hi
    Can anyone tell me where I can get a set of seals for a hammerli ar20ft reg. I believe its the same as a walther reg. I could also do with instructions on stripping and rebuilding.
    The seal that's leaking is the one just before the valve so when I screw the bottle on it leeks air. The spring washers in it are not all back to back, the first 3 are the same way so they don't work as a spring! Should they?

    Any help/ideas very welcome

    Pete
    Tikka T
     
  2. aitchuk

    aitchuk Member

    Joined:
    Dec 20, 2008
    Messages:
    211
    Location:
    Sheffield
    Club:
    redfearns
    I belive Jim Hogan at Redbeck shooting surplies has just recieved
    details of the Hammerli wether or not he has spares is another thing
    but may be worth a ring.

    Aitch
     
  3. CameronWilson

    CameronWilson Member

    Joined:
    Feb 24, 2010
    Messages:
    375
    Location:
    Midlothian
    Club:
    JGARC
    I don't know about the Hämmerli, but it's not unusual to see belleville washers facing in the same direction.

    ))) will still act as a spring - just a very stiff one. Or it maybe that it's just being used shim the space.
     
  4. tisme

    tisme New Member

    Joined:
    Oct 17, 2011
    Messages:
    14
    Location:
    Matfield
    Thanks for the reply's this is driving me up the wall. Nobody seems to know what way they are meant to be and to make it worse it looks like it has two valves with belleville washers on them! Is this std or a custom mod?

    On a good note I have some o rings coming tomorrow but not from an air rifle company but from a bearing manufacturer.

    So many phone calls to dealers today have got me no where :( I think the only way is to strip another ar20ft and have a look.

    Some one must know............

    Pete
    If I had hair I would have pulled it out today
     
  5. wyn

    wyn New Member

    Joined:
    Feb 4, 2011
    Messages:
    9
    Location:
    Cardiff
    Here's a pic of the reg from my hammerli.


    DSC01580.jpg
     
  6. wyn

    wyn New Member

    Joined:
    Feb 4, 2011
    Messages:
    9
    Location:
    Cardiff
    I had a look at the bellville washers in the reg i have apart and they are stacked like this:


    Knock open valve end- )))()()()()( ............... ))(())(())(( - air cylinder end.

    There are two seperate stages to the reg so two stacks of washers.
     
  7. tisme

    tisme New Member

    Joined:
    Oct 17, 2011
    Messages:
    14
    Location:
    Matfield
    Wyn I love you, you can have my babies. You don't have any O rings do you?

    Thanks top man

    Pete
     
  8. wyn

    wyn New Member

    Joined:
    Feb 4, 2011
    Messages:
    9
    Location:
    Cardiff
    No i'm affraid i don't have any o rings
     
  9. tisme

    tisme New Member

    Joined:
    Oct 17, 2011
    Messages:
    14
    Location:
    Matfield
    Thanks again for the pic and diagram. Made my day.

    Pete
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice