Discussion in 'Air Arms' started by casper, Jul 18, 2014.
Will an Air Arms EV2 MK4 stock fit on to an EV2 MK2 action without modifications.
Yes as far as I know there is no difference to inletting
What about the hamster jack?
Mk2 is two 10mm posts and I believe the mk4 is a single thicker post.
I'm not sure but think the mk4 stocks had the 2 holes inletted into the bottom of the stock.
The difference if I'm correct is in the actions, as the mk2/3 was machined to have the extra piece to clamp the hamster into place..
The mk4 I believe it's clamped on the hamster post itself...??
Check under the stock as not sure if you can use the hamster off a mk4 stock on to the mk2 action..
Many thanks guys for such quick reply's it is much appreciated.
I'll follow up on your comments and bottom out the hamster issue. I hope it will be simple but if mods are required there is always a fix.
Only if you machine out the underside of the breach block.
The Mk2 action will slip into the 4 stock easily, but without machining you won't be able to use the AA hamster. I threw it in the cupboard and bought a TEC; any after market hamster or raiser that fits to the under-rail will work
Separate names with a comma.