UKAHFT Dropping the Fore-end or Hamster

Discussion in 'UKAHFT Questions and Answers' started by Paul444, Jun 2, 2014.

  1. Paul444

    Paul444 New Member

    Joined:
    Nov 9, 2013
    Messages:
    12
    Location:
    London
    I want to extend downwards my Hamster or Fore-end what is the maximum depth that is permitted in HFT and where do you take the measurements from.
     
  2. Rift

    Rift "Agent"

    Joined:
    Sep 22, 2009
    Messages:
    435
    Location:
    Essex
    Club:
    M.A.D
    EQUIPMENT

    Most rifle & stock designs can be used for UKAHFT competition as long as they are within the following rules:

    Forend depth is limited to a maximum of 150mm, this is measured from the centre of the barrel to the lowest part of the rifle forward of the pistol grip.
    FT style butt hooks are not allowed, although the paddle style of butt pad is allowed.
    The paddles of the buttpad must not exceed 2.25" in length
    When standing or kneeling, no part of the rifle may be in contact with the ground.
    When taking a prone shot the only part of the rifle which may be touching the ground is the bottom edge of the butt pad, no other device or buttpad extension may rest on the ground

    Taken from https://sites.google.com/site/ukahft/2013-rules
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice