dommie action into pro target stock

Discussion in 'General Airgun Chat' started by sportsmatch, Mar 1, 2011.

  1. sportsmatch

    sportsmatch Member

    Joined:
    Jun 12, 2009
    Messages:
    768
    Location:
    Blackwood S. Wales
    Club:
    Quarry Rifles
    How much work is there to do the above the stock will be later hydro-graphiced

    Gary
     
  2. Dale

    Dale Active Member

    Joined:
    Sep 16, 2009
    Messages:
    299
    Location:
    Cornwall
    Standard Pro-Target stock or a custom?

    Just thinking on a standard stock the Pro-T action has a trigger guard which is part of the action whereas a Dommie doesn't so you might need to consider that.

    If a custom stock where the trigger guard has been incorporated in the wood ignore the above.
     
  3. sportsmatch

    sportsmatch Member

    Joined:
    Jun 12, 2009
    Messages:
    768
    Location:
    Blackwood S. Wales
    Club:
    Quarry Rifles
    A standard pro taget stock Dale

    Gary
     
  4. berty177

    berty177 Judge Diva

    Joined:
    Apr 10, 2009
    Messages:
    2,015
    Location:
    South Wales
    Club:
    Nelson FTC
    Stock fit

    Gary,

    It might be worth speaking to Jon Harris, he made an ali plate for Neale Marklew's stock which was originally made for a Pro Target fella.

    As you can see it isnt a bad fit to be fair... Just a thought as I dont know anyone else who has done it that way.............


    Berty
     
  5. RobF

    RobF Administrator Staff Member

    Joined:
    Mar 4, 2010
    Messages:
    11,980
    Location:
    Poole, Dorset
    Club:
    Parkstone Gun Club, South Dorset FTC, Southampton Buccaneers
    think my ex cliffy stock was made for a PT... difficult to tell what's gone on inside... drill a hole and line it up...
     
  6. Jon

    Jon Member

    Joined:
    Nov 1, 2008
    Messages:
    758
    Location:
    Nr Wolvo
    Easy Gary, just machine up a block of correct height and taper to mate with the existing stock fixing thats in using same screw. New M5 hole and screw to mate up where the action sits, job done.
    Might need the base machining for block to sit on, know what most are like with a router and no working edges to follow.

    Neales was intended for an RN10 probably the worst inletting ever come across Z shaped.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice