Discussion in 'General Airgun Chat' started by Steve, Aug 24, 2011.
Anyone done this,if yes any pics and any problems.Ta
Done a few, stock fixings are in different places plus the RN10 is deeper.
A guy from our club bought a Pro Target Paul Wilson Stock for a dommie, it came with an additional alloy block to deepen the Dommie action, it bolted to the dommie using the its fixing screw the had another hole drilled in the block to line up with the Pro target stock bolt hole, i believe he bought it from Bill Peat on here.
Hope this helps, ATB Mike D
think mine is a PT stock, needs a filler block and a hole drilled in another place if you are going to do it. Dommie is held in with just one screw.
For Rob really this question,if yours is a Pt stock,is your action mounted high in it so there is a gap behind the reg?The dommi action needed a block approx 38mm adding to it,I have used the original mounting screw to mount the block to the dommi then drilled and tapped another hole to match up to the original hole in the pt stock.
A picture paints a thousand words