1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Daystate Huntsman MK2

Discussion in 'Daystate' started by Mr Bright, Apr 11, 2010.

  1. Mr Bright

    Mr Bright New Member

    Joined:
    Mar 18, 2010
    Messages:
    5
    Location:
    Cwmbran South Wales
    I have just purchased a second hand Huntsman MK2 and was wondering if anybody knows the recomended filling pressure in BAR as i can't find any info on this

    Thanks
     
  2. McMurphy

    McMurphy New Member

    Joined:
    Jun 24, 2009
    Messages:
    309
    Location:
    Dudley
    I really like these, especially the thumbhole stocked version.Always fancied putting together a custom .25 cal example.:)
     
  3. rubi-tong

    rubi-tong Bernies MY *****

    Joined:
    Feb 18, 2009
    Messages:
    156
    Location:
    Halifax
    Did'nt realise they did a thumbhole version in the huntsman?
    The fill pressure will be on the shroud near the breech but my Mk4 is a 230bar but i only fill to 190bar.
     
  4. aitchuk

    aitchuk Member

    Joined:
    Dec 20, 2008
    Messages:
    207
    Location:
    Sheffield
    Club:
    redfearns
    Its a knock open valve so your best bet is to fill to 190
    and do a power curve my mk 1 gives 65 shots of 185 bar
    hope this helps

    Aitch
     
  5. chrispro97

    chrispro97 New Member

    Joined:
    Jun 10, 2009
    Messages:
    1,062
    Location:
    atherstone
    Club:
    purley chase ftc
    175 to 180 bar a lad got one down our club and this is how he runs is matey any higher and the power curve kicks in matey,:):):)
     
  6. Mr Bright

    Mr Bright New Member

    Joined:
    Mar 18, 2010
    Messages:
    5
    Location:
    Cwmbran South Wales
    Thanks guys, Yes it's the thumbhole stock version too and ive just set zero at 25 yds (my garden length) and i can't get over how good this gun is. Its got a hawke 3-9x50 mil dot and a silencer and it is a brilliant rifle.
    Cheers for the advice.
     
  7. Bill Peat

    Bill Peat TALLENTLESS PUMPERTEER

    Joined:
    Dec 18, 2008
    Messages:
    473
    Location:
    Snoresville,Atherstone.Warks.
    Club:
    PURLEY CHASE
    ???????????????????????????????????????????????????????????????????????????????????????????????????????
    Real daystate huntsman mk11 my two filled to 190 fired 6 shots off and pellets came up to zero then you should get 60/65 quality shots. In my opinion best knock open valve made. Shame about pellet trough leaking water into hammer & spring,one thing to keep an eye on + put tape over pins on trigger block as the sometimes work loose stopping you firing.
    Enjoy your mk11, i did
     
  8. Bill Peat

    Bill Peat TALLENTLESS PUMPERTEER

    Joined:
    Dec 18, 2008
    Messages:
    473
    Location:
    Snoresville,Atherstone.Warks.
    Club:
    PURLEY CHASE
    ???????????????????????????????????????????????????????????????????????????????????????????????????????:confused:
    REAL DAYSTATE HUNTSMAN MK11 MY TWO FILLED TO 190 FIRED 6 SHOTS OFF AND PELLETS CAME UP TO ZERO THEN YOU SHOULD GET 60/65 QUALITY SHOTS. IN MY OPINION BEST KNOCK OPEN VALVE MADE. SHAME ABOUT PELLET TROUGH LEAKING WATER INTO HAMMER & SPRING,ONE THING TO KEEP AN EYE ON + PUT TAPE OVER PINS ON TRIGGER BLOCK AS THE SOMETIMES WORK LOOSE STOPPING YOU FIRING.
    ENJOY YOUR MK11, I DID
     
  9. rubi-tong

    rubi-tong Bernies MY *****

    Joined:
    Feb 18, 2009
    Messages:
    156
    Location:
    Halifax
    Okay, I now realise it's the earlier one. Sorry
     

Share This Page