custom stock makers anyone know of any

Discussion in 'General Airgun Chat' started by FUBAR, Sep 19, 2009.

  1. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
    hi guys ,

    ive been thinking of late about buying a custom stock for my hw100 . i have been looking at staffordshire synthetics stocks but been told that they are not that great for communication and take along time to do the job ! , im not sure if this is just a one off case or other people have had problems with them . iv'e also been looking at ginb stock makers but im not to sure aagghh . help needed ! any suggestions would be really cool about now .

    regards FUBAR:)
     
  2. MattF

    MattF New Member

    Joined:
    Apr 29, 2009
    Messages:
    169
    Location:
    chesterfield
    Club:
    Chesterfield HFT Club
    Hi
    There's also Custom Stock at Killamarsh nr Sheffield they also sell stocks on the bay
    have got a GINB stock on my GML400 nice stock but its not light its the No7 special

    Matt
     
    Last edited: Sep 19, 2009
  3. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
    do they have a website mate ?and do you know of anyones dealings with em?
     
  4. Ferrets Bueller

    Ferrets Bueller New Member

    Joined:
    Apr 16, 2009
    Messages:
    104
    Location:
    Wirral Merseyside
    Me (as per aaoc) this is my cs800 stock from custom stocks and cost me £240

    [​IMG]
     
  5. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
    nice stock there mate , do they do stocks for all types of air guns ? also do they have a website ?

    cheers:cool::)
     
  6. 5teve L

    5teve L STOP ! HAMMER TIME !

    Joined:
    Apr 16, 2009
    Messages:
    1,158
    Location:
    Horsham, West Sussex.
    Club:
    The Oaks & Horsham hawks
  7. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
  8. JAGXKRS

    JAGXKRS Sparky's Bodyguard

    Joined:
    Apr 16, 2009
    Messages:
    2,038
    Location:
    Lyneham
    If your at Buxted tomorrow I'll have my SSS Wolf with me:D
     
  9. Charlts

    Charlts Getting dusty

    Joined:
    Nov 8, 2008
    Messages:
    2,014
    Location:
    Leicester
  10. Jon

    Jon Member

    Joined:
    Nov 1, 2008
    Messages:
    758
    Location:
    Nr Wolvo
    Did the stock fixings line up Paul?
     
  11. Knockedover

    Knockedover CSFTA Champ

    Joined:
    Apr 6, 2009
    Messages:
    991
    Location:
    Nr Portsmouth,Hampshire
    Heres a Paul Wilson on my HW100:)...
    [​IMG]
    Or you could have a Lanyman like I had on my Dommie...
    [​IMG]
    Or a Ginb like I have on my TX...
    [​IMG]
    Or maybe even a Gary Cane like i have on my ISP...
    [​IMG]
    As you might have guessed i like my custom wood :D:D
    I also have some of Mick Frenchs work on my Steyr which is also superb quality and comes highly recommended:)
     
  12. Ferrets Bueller

    Ferrets Bueller New Member

    Joined:
    Apr 16, 2009
    Messages:
    104
    Location:
    Wirral Merseyside
    If your talking to me mate yes they did perfectly;)
     
  13. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
    thanks lads your a good bunch :)
     
  14. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
    how did you find there service overal , because im seriously thinking about getting one done but i have heard some negative feed back regarding coms and job time .
     
  15. FUBAR

    FUBAR New Member

    Joined:
    Apr 18, 2009
    Messages:
    245
    Location:
    horsham
    without being cheeky
    :eek: how much did you pay for these fine stocks ?
     
  16. Knockedover

    Knockedover CSFTA Champ

    Joined:
    Apr 6, 2009
    Messages:
    991
    Location:
    Nr Portsmouth,Hampshire
    The stocks came on most of the guns that I've bought. The Wilson was an FT model that was cut slightly thinner to save weight and had a few optional extras (cheekpiece,buttpad,cappings and spacers) and came in around the £450-550 mark I beleive:eek: The Steve Lanyman stocks are still very much available and depending on the spec you want come in from around £350 and upwards but can be made a perfect fit and to pretty much any spec you'd like:). The Ginb at the time this one was bought (with a deeper than standard forend) was around £240 but I beleive they are somewhat dearer now and the Gary Cane stock was one he built for himself (the ISP was his own FT gun in the early 90'S) but again you would be looking at around £350 and upwards. For the Frenchi wood work i haven't a clue as i done some haggling with some welsh bloke and got it at a bargain price:D:D
     
  17. Shaqa

    Shaqa New Member

    Joined:
    Jan 3, 2009
    Messages:
    113
    Location:
    Glen Oroua, New Zealand
    For what its worth.....I bought a GinB FT9 to my DS X2 just over a year ago. They comms between myself and the GinB people was very very good and the entire transaction went extremely smoothly. The stock fitted perfectly when it arrived, it was as though they had had the action there with them when they made it.
    GinB are certainly worth contacting.
     
  18. Feral

    Feral New Member

    Joined:
    Apr 16, 2009
    Messages:
    338
    Location:
    South London
    Nick I had a Ginb on my Steyr, fantastic piece of craftsmanship, hassle free all the way from my initial email to getting the stock.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice