Crx

Discussion in 'General Airgun Chat' started by steveggg, Jun 6, 2011.

  1. steveggg

    steveggg Trainee Grumps

    Joined:
    Apr 17, 2009
    Messages:
    287
    Location:
    Slough Berks
    Help,

    My CRX needs a service, who would you recommend, could try myself if i had a guide, any ideas folks.

    Regards Steve
     
  2. Pete m

    Pete m New Member

    Joined:
    Feb 9, 2011
    Messages:
    104
    Location:
    Nuneaton
    Club:
    Greyhound
    Go to Daystate they are the only ones I know who could o a full job including the reg I had my CRX done there in February £120 that I took it and collected it so no post costs
     
  3. Knockedover

    Knockedover CSFTA Champ

    Joined:
    Apr 6, 2009
    Messages:
    991
    Location:
    Nr Portsmouth,Hampshire
    Steve, doesn't Dave Brayford service these? Might he worth a call :)
     
  4. JAGXKRS

    JAGXKRS Sparky's Bodyguard

    Joined:
    Apr 16, 2009
    Messages:
    2,038
    Location:
    Lyneham
    Yep he does, might be a service guide on the DOC??
     
  5. Willbe

    Willbe I Like BIG Hats!

    Joined:
    Dec 1, 2008
    Messages:
    796
    Location:
    Cheadle, Staffs
    Club:
    Far Coley FTC


    He does indeed. Thought daystate sent all that sort of work his way. If in doubt google Staffordshire Custom Rifles :)
     
  6. Kingplinker

    Kingplinker " Horsham HFT champion 2010 "... apparently...

    Joined:
    Apr 16, 2009
    Messages:
    679
    Location:
    Sussex
    John Ostler ex Ripley Rifles did a superb job on mine Steve .

    atvb

    Dave
     
  7. Pete m

    Pete m New Member

    Joined:
    Feb 9, 2011
    Messages:
    104
    Location:
    Nuneaton
    Club:
    Greyhound
    Alan the senior gunsmith at Daystate did mine so yes they do them at the factory
     
  8. lcp

    lcp Member

    Joined:
    Jul 29, 2009
    Messages:
    92
    Location:
    armagh
    john

    Hi, John Ostler for me did a brill job on mine included putting in a new lighter hammer.
    Greg
     
  9. dave benyon

    dave benyon Spirit of HFT 2009

    Joined:
    Apr 16, 2009
    Messages:
    512
    Location:
    Lytham, lancs
    Steve I think Dave Brayford is shooting the Emley and Anston rounds so you may be able to give him your rifle at the shoot, might be worth a phone call to him.
     
  10. chrispro97

    chrispro97 New Member

    Joined:
    Jun 10, 2009
    Messages:
    1,062
    Location:
    atherstone
    Club:
    purley chase ftc
    mine which is a cr97 woz done at the factory same as pete m said who done is as well,he only done the reg at mine at the factory i done all over seals etc
     
  11. steveggg

    steveggg Trainee Grumps

    Joined:
    Apr 17, 2009
    Messages:
    287
    Location:
    Slough Berks
    Thanks folks, got a few options now.

    Regards Steve
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice