Anschutz quickfill

Discussion in 'Anschutz' started by wiseguy, Sep 28, 2019.

  1. wiseguy

    wiseguy Active Member

    Joined:
    Apr 28, 2010
    Messages:
    365
    Location:
    Leende, NL
    Club:
    DFTA
    92114CA6-D5B7-48C1-8169-7B31310CBAC7.jpeg ACCCF766-3F96-41DB-9D45-C8F70200712D.jpeg 7C1E82F8-7F4A-4CD4-815D-C25419EF7384.jpeg Well...., quickfill received, looks very good and decent made.
    Also received the 32mm aluminium clamping system today, but that’s not gonna work.
    In rest I get 31.4mm diameter and opening it up carefully extends that to max 31.55mm. Needless to say a 32mm cilinder won’t pass that hole...
    I guess the error was in the conversion from imperial to metric :D
    Will email the supplier to see if this was a error in production.
     
    Last edited by a moderator: Oct 7, 2019
  2. hmangphilly

    hmangphilly Can't Re Member

    Joined:
    Nov 5, 2013
    Messages:
    2,579
    Location:
    wimborne
    It's too tight Rob .
    Don't try to stretch it and use it , you'll scratch your tube .

    I'd be thinking 32. 4 or thereabouts not critical so long as it's abit over , and make up the slack with a strip of wet n dry ( rough side away from the cyl ) .

    let us know how you get on .
     
    castle likes this.
  3. RobF

    RobF Administrator Staff Member

    Joined:
    Mar 4, 2010
    Messages:
    13,089
    Location:
    New Forest, Hampshire
    Club:
    Parkstone Gun Club, South Dorset FTC, Southampton Buccaneers
    snigger
     
    castle likes this.
  4. what barn door

    what barn door Now them tin chickens are going to get it....

    Joined:
    Nov 10, 2014
    Messages:
    782
    Location:
    crewe, cheshire
    :eek:
     
  5. wiseguy

    wiseguy Active Member

    Joined:
    Apr 28, 2010
    Messages:
    365
    Location:
    Leende, NL
    Club:
    DFTA
    I received a reply from the supplier of the clamping system (XTX).
    It seems their cnc supplier has made an error in production, current stock is also out of spec. I received a refund for the clamp.
    Now I need to find someone over here with a latte....
    To be continued..
     
  6. hmangphilly

    hmangphilly Can't Re Member

    Joined:
    Nov 5, 2013
    Messages:
    2,579
    Location:
    wimborne
    Rob send me your address by private message
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice