Acz ultra ft stock

Discussion in 'Hunter (HFT) & Field Target (FT)' started by JACK DANIELS, Oct 2, 2016.

  1. Bill Fowler

    Bill Fowler Member

    Joined:
    Mar 17, 2018
    Messages:
    93
    Location:
    Worksop
    Club:
    Anston Ftc
    I have a picture but don't know how to upload it.
     
  2. NeilM

    NeilM Well-Known Member

    Joined:
    Mar 15, 2015
    Messages:
    1,410
    Location:
    Nth Somerset
    Club:
    Mendip & Shebbear
    I've also got an STX. If the single shot tray is the same as mine, it is pish and needs to be replaced with one from SMW SMWEngineering

    Two other things have found with mine is that it does not shoot well with a clean barrel. I followed a pretty standard routine I have for new guns and the accuracy results were disappointing, a quick read on line told me that the American's typically don't clean their smooth twist barrels and so I stopped cleaning and accuracy returned to being excellent. Also it likes 'big' pellets, so JSB and Air Arms that come out at 4.48 to 4.50 (never believe the label sizes) do not go well, the one batch of JSB's that went really well were absolutely terrible in everything else. JSB heavies show some potential as do H&N Barraduca FT. You will need to do as much pellet testing with the STX as any other rifle, that was a slight let down for me as I'd assumed the smooth twist barrel would be more tolerant.

    The STX Streamline is a good rifle, just get the right pellets and you'll be fine with it.
     
    Monty1 likes this.
  3. TxRx

    TxRx New Member

    Joined:
    Jan 10, 2019
    Messages:
    10
    Location:
    Abergavenny
    This is my offcut, unfinished prototype from Form. 48A476F6-045B-4FAA-B870-02FC1967C4D8.jpeg
    To add the pic you just select upload file below the reply box and select the image you want to upload.
     
  4. Bill Fowler

    Bill Fowler Member

    Joined:
    Mar 17, 2018
    Messages:
    93
    Location:
    Worksop
    Club:
    Anston Ftc
    There you go. IMAG0263.jpg
     
    TxRx likes this.
  5. Monty1

    Monty1 New Member

    Joined:
    Mar 5, 2019
    Messages:
    25
    Location:
    Middlesbrough
     
  6. TxRx

    TxRx New Member

    Joined:
    Jan 10, 2019
    Messages:
    10
    Location:
    Abergavenny
    Very useful thanks, time to find out if my woodworking skills from school will do the job!
     
  7. Monty1

    Monty1 New Member

    Joined:
    Mar 5, 2019
    Messages:
    25
    Location:
    Middlesbrough
    time to put a pic up
     

    Attached Files:

    • fx3.jpg
      fx3.jpg
      File size:
      259.6 KB
      Views:
      44
    scannerzer likes this.
  8. rubi-tong

    rubi-tong Bernies MY *****

    Joined:
    Feb 18, 2009
    Messages:
    180
    Location:
    Halifax
    This is my FX Streamline STX, added a carbon shroud and refinished the God awful black varnished wood. Reshaped the grip and cheek piece and added my own 3D printed butt plate.
    Great gun but I long for a Steyr or Dommy.
    IMG_20190525_005801_567.jpg
     
    richos36 likes this.
  9. Monty1

    Monty1 New Member

    Joined:
    Mar 5, 2019
    Messages:
    25
    Location:
    Middlesbrough
    very nice, were did you get the shroud from
     
  10. rubi-tong

    rubi-tong Bernies MY *****

    Joined:
    Feb 18, 2009
    Messages:
    180
    Location:
    Halifax
    EBay lol, just bought a meter of carbon tube, 20mm OD/18mm ID. Cut to length and put it on instead of the alloy one. The ends just unscrew.
     
  11. rubi-tong

    rubi-tong Bernies MY *****

    Joined:
    Feb 18, 2009
    Messages:
    180
    Location:
    Halifax
    Some closer shots
     

    Attached Files:

    Monty1 likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice