Acz ultra ft stock

Discussion in 'Hunter (HFT) & Field Target (FT)' started by JACK DANIELS, Oct 2, 2016.

  1. JACK DANIELS

    JACK DANIELS New Member

    Joined:
    Aug 29, 2016
    Messages:
    23
    Location:
    YORKSHIRE
    Has any one had one of these stocks? thinking of trying ft again and have an S400 that i could use for the action.
     
  2. poth

    poth Whafta old Gits world champion

    Joined:
    Nov 20, 2011
    Messages:
    681
    Location:
    Tredegar
    Club:
    Quarry hunters hft
    Few on the hft cuircuit dan mcmahon uses one to good effect won thw 90 shot endurance at furnace yesterday plenty of adjustment and very well made stock
     
  3. Steve Bowers

    Steve Bowers Member

    Joined:
    Feb 8, 2011
    Messages:
    252
    Location:
    Leeds
    Club:
    Pontefract
    Acz ultra stock

    I got one about a year ago and put a HFT 500 in it (sold the 500 stock to cover the cost) I got it at a reduced price as there were some marks on the black woodwork but as the woodwork is in my opinion was a bit "naf" the first thing I did was to make my own set out of some American Cherry.
    Warren Edwards of Rotherham is now making sets for the importer and will also supply any one that wants a set.
    We can talk about commission later Warren ha ha !
    So if anyone has a 400/500 they want to "pimp" up I'd say go for it.

    Steve
     
  4. SeanBa

    SeanBa New Member

    Joined:
    Jun 20, 2016
    Messages:
    11
    Location:
    Higham, Kent
    Club:
    ETL
    Ultra Stock

    A couple of the guys at our club have them and they look very good, ultra adjustable, good looking and appear to be well made, I have one on order for my S200.

    Sean
     
  5. vinny

    vinny WHFTA 2015 World Champion

    Joined:
    Mar 16, 2014
    Messages:
    685
    Location:
    essex
    Club:
    M.A.D
    Agree with previous mails good adjustability and well made , also sold the 500 stock to cover the price ,I went for the laminate which weren't all that special either, a quick stripdown and relaquer really made it stand out , dunno why they don't sell them like it in the first place, the butt hook is very basic but can be made to grip better with very little effort, would seriously advise using the bench rest plate rather than the hamster it comes with
     
  6. gdavison

    gdavison Active Member

    Joined:
    Sep 22, 2016
    Messages:
    220
    Location:
    Baughurst
    Club:
    Basingstoke - BARPC & Bisley - BFTC
    I am really interested in building a 510 into one of these stocks after trying Chris's build at Ronnie Sunshines

    Trouble is finding a good secondhand S510 or ultimate to start with :)
     
  7. chucky82

    chucky82 Member

    Joined:
    Nov 13, 2014
    Messages:
    74
    Location:
    birmingham
    Think Dan was shooting with a different stock at furnace but he does normally shoot with it very well.
     
    Last edited: Oct 3, 2016
  8. JACK DANIELS

    JACK DANIELS New Member

    Joined:
    Aug 29, 2016
    Messages:
    23
    Location:
    YORKSHIRE
    Thanks for info am tempted but if as said the woods a bit iffy and by the time you get that sorted you nearly in to second hand pro target EV2 money , unless you drop on a good second hand deal .
     
  9. SeanBa

    SeanBa New Member

    Joined:
    Jun 20, 2016
    Messages:
    11
    Location:
    Higham, Kent
    Club:
    ETL
    Ultra stock

    That depends on if you already have a 200/410/510 then it's a definite no brainer :)

    I Plan on getting one even though I just got and EV2 MKii.

    Sean
     
  10. bionic biker

    bionic biker Member

    Joined:
    Oct 4, 2009
    Messages:
    118
    Location:
    Deeside, North Wales
    Club:
    Fort Airgun Club
    :)Few pis's of my stock with Warren Edwards woodwork.

    [​IMG]



    Pictures updated March 2019. IMHO a great stock.

    Cheers Bill
     
    Last edited: Mar 8, 2019
  11. JACK DANIELS

    JACK DANIELS New Member

    Joined:
    Aug 29, 2016
    Messages:
    23
    Location:
    YORKSHIRE
    Looks good lot better with the WE wood work
     
  12. vinny

    vinny WHFTA 2015 World Champion

    Joined:
    Mar 16, 2014
    Messages:
    685
    Location:
    essex
    Club:
    M.A.D
    cleaned up original laminate

    Just a clean up and re laquer, certainly aint WE, just 10 quids worth of laquer 20160112_180925.jpg
     
  13. balloo

    balloo Member

    Joined:
    May 30, 2011
    Messages:
    52
    Location:
    west yorkshire
    Club:
    Redfearns, P.A.R.C.
    The hft 500 fits ok then ?
     
  14. Flynny

    Flynny New Member

    Joined:
    Sep 11, 2016
    Messages:
    7
    Location:
    Devon
    Out of interest, what mods have you done to the Butt hook. Considering one of these for an AA410
    Cheers
    Flynny
     
  15. vinny

    vinny WHFTA 2015 World Champion

    Joined:
    Mar 16, 2014
    Messages:
    685
    Location:
    essex
    Club:
    M.A.D
    I bought the ultimate so it came with a rod and balance weights that attached to the bottom of the hook, they caught on my moobs :) so I drilled the weights out same size as the bar that attaches the hook to the stock and put them on there instead.
    I then got some super heavy duty double sided tape and stuck a strip of textured rubber mat to the face of it , (the stuffs that about 2mm thick and has a saw type profile on it ) , surprisingly enough it is REEAAAlly grippy.
    You can add a washer either top or bottom of the rods that connect to the hook to give a bit of cant if you want
     
  16. SeanBa

    SeanBa New Member

    Joined:
    Jun 20, 2016
    Messages:
    11
    Location:
    Higham, Kent
    Club:
    ETL
    A couple of club members have them, they look and feel well made and VERY adjustable, I liked them so much I have one on order for my S200.

    Sean
     
  17. ciaran

    ciaran New Member

    Joined:
    Dec 16, 2015
    Messages:
    4
    Location:
    rossendale
    They look good, I assume plenty of adjustment to tailor fit.
    (Adds to wishlist :) )
     
  18. Monty1

    Monty1 Member

    Joined:
    Mar 5, 2019
    Messages:
    26
    Location:
    Middlesbrough
    Got one on the way, I bought the stx streamline ft from Matt at sure shot, looking forward to playing with it
     
  19. Bill Fowler

    Bill Fowler Member

    Joined:
    Mar 17, 2018
    Messages:
    95
    Location:
    Worksop
    Club:
    Anston Ftc
    I bought one for my MPR but I didn't like the standard wood on it so went for the custom wood. At £510 it's a pricey stock just to try one I liked the stock but I bought an ev2 and shooting that now.
     
  20. TxRx

    TxRx New Member

    Joined:
    Jan 10, 2019
    Messages:
    10
    Location:
    Abergavenny
    Do you have any pics of it? I’m planning to make my own from some offcuts I’ve picked up.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice