Great question :)
This is not a good way of cleaning
You need to clean the barrel until the tampons come out clean.
I use technical acetone for cleaning.
I put a...
The first thing you should do is clean the barrel properly.
After cleaning, wipe it with Napier oil.
After a few shots the speed will drop down...
All what you have to do is increase the tension by screwing in screw number 3.
The tension of this spring cannot be light, especially when you...
You are right. While writing, I thought about the anschutz trigger .
However, I changed steyr trigger, I don't have the first stage.
In fact the two-stage trigger was made for safety.
I also prefer single-stage. In a single-stage trigger, there is no tension on the finger...
Shorten movement will made your fireing very fast.
Don't be afraid to turn the screw, it's really easy.
Remove the black plastic cover,...
This screw holds the trigger plate and the pin on the bearings.
When you unscrew it you will be able to move the plate left or right and pull out...
About point 8
Screwing the screw (to the right) will shorten the travel till self-shooting is reached, unscrewing the screw (to the left) will...
Yes. Since 12 years i move this screw back and forward. Red glue is strong and you don't glued it every time.
Long second stage is not good...
Yes and not.
YES - because without red glue this screw is not stable in threads.
Latches must always close the same way, then there will be no...
Please look at below pictures.
4. this screw is adjustment of 1 stage travel
1. this screw is adjustment of 2 stage travel ;)
I think below pictures give you an answer at your problem ;)
Watching Colin movies, you can see how top FT shooters are making mistakes by pulling...
Nurek have extensive knowledge of air guns.
He is a legend on the Polish forum :)
For 12fts the stabilizer must slide out to 37mm. ;)
Test it out through shooting.
You cannot set the stabilizer in your hand.
You can lean the...
Best second zero is 25-26m but your sight height should be 42mm. Look at Chair Gun.:)
hmangphilly i know that i used steyr almost 12 years :)