does he have rear and front rests ?
i prefer simple sandbags instead of fancy and expensive rests
a bubble level on the rail or scope can help to...
he backed it off and written it in his first post.
okay, i would use a weaker hammer spring and chrono a string
and maybe set the reg higher
pretty much useless
it looks like the lense is not made for this close space
i would buy this set
Anschütz 9015 Ersatzteil-Set Luftgewehr High Power 16 Joule Regulator
Schlagstück = striker, hammer
Feder = spring
Buy a spring witch less wire diameter
whats your engergy limit ? sub12 ?
reg setting ?
does the rifle came from the factory with a reg ?
did someone got informations about how to upgrade the LP50 to the RF Version (7,5J) ?
592mm including the bonded shroud
420mm barrel lenght
17,8mm overall od
14mm id shoud
so also around 14mm barrel od
weather went nice again after a few weeks of rain and windy conditions and i was able to put some good groups down the range.
thank god my barrel...
i bedded the action with loctite EA3463 Epoxy and it worked nearly really well. used a bit too much but i could fix that. pictures are coming...
temporary fittet a 5mm steel plate (not glued)
and dovetail to weaver rail from utg UTG Europe GmbH - Hunting/Shooting, Sporting...
thanks for that great explanation!
theses pictures are also very helpful :)
i try to explain what my stock and action are doing right now:
Thats a really good idea with a steel plate. a piece of steel is coming at end of the week.
what do you mean exactly with "refit the reservoir...
Why should i cut the top of the band off ? or do you mean the shim that i removed ?
fully float the cylinder = not touching wood but with the...
i removed the shim between the barrel and the barrel band.
i can barely fit one sheet of copy paper between the lower side. its not centered - is...
new pellets ?
JSB Diabolos. Match, Field Target, Jagd. Alle Kaliber.
ill bet that much grease came from greasing the air cylinder threads a bit too much :eek:
she made it home!
little yong heng took about 2 minutes to fill her up from zero to 200. i was really surprised that a checkvalve is build into...
i shot this card with a hämmerli ar20 at 25m with 7,5j
the 9015 should be at least that good ! :rolleyes:o_O:eek:
i will pick up my new 9015 Club 7,5J (cheapest version) tomorrow. it will not be converted because im limited to 7,5j
it will be used for classic...