A new, try-out. shooter wouldn't be a club member, and it would seem that this would only apply to club members. As pointed out above, the club...
You say it's unstable. Funny how it's been OK for me ;)
The way to run the Walther Alutec is to have the long laminate forend way lower than the chassis; I bet that would change your c.o.g.
At Dunfermline as an FT and HFT club of over 30 years' standing afaik all we seek from NSRA is our insurance, which is £200 I think.
It's on this page:
Walther LG300 and LG400 o-ring sizes
Who's leg do I have to hump to get a dry Martini round here?
Is the screwfix stuff stretchy? Their builder's line stuff has been a pita in the past due to needing to gather armfuls of it when pulling up target.
You didn't shake the bottle hard enough ;)
I think the owner of RS is under constrictions due to divorcing so cant get them made basically.
The thing which makes them the most useful on an...
It would be great if all and sundry could persuade Mr Rangesports to start doing them again, as imho these are the best, most usable mats for HFT.
Once you get one I’d advise applying some waterproofing spray in good quantities. Hold it under the tap if you wonder why :eek:
All the detail you need is in the link Rules & Format - World Hunter Field Target Association
Salopettes are a good option for hft as they help stop water and dirt getting in the midriff; you can find army surplus ones that are allegedly...
I do as it happens but there’s barely enough room for James Hesson :D
The Hobbits in the north don’t have car ceilings tall enough I fear :eek:
Rob this is the Walther spacer; it just makes the 300 reg spigot longer to fit onto the firing valve seal in the 400 action:
The reg bolt positions are the same. The spacer only goes between the end of the spigot and the firing valve seal, it's not over the whole end of...
As I have seen the official Walther LG400 -> 12ftlb spacer as a spare part on Judith's spares website, I think the factory solution is a...
Pete serviced a reg I use in my 400, it’s the same device.
Knockover spares or Kilty (Barry McDonald) on here.
Spare parts for Nockover Targets they also sell the red plastic string winders if you ask.