The Walther factory has acknowledged the fact that the soft LG300 seals are not perfect by changing to a hard polymer (POM/Delrin??) valve seal in...
IMHO the shift caused by light conditions is very real and caused by the eye, and not the scope.
The iris of your eye is basically a lens...
I use mine at 50 mag only for range finding and for shooting. At 80 mag the image is too wobbly and not sharp because of that (and a bit dark) to...
Where the top of your trajectory is depends on the range that you have zeroed your scope.
With a far zero of 30 meters your top of...
Rimfire Blend Bore Cleaner - Gun Cleaning Supplies
Bore Tech Rimfire Blend
Good stuff to remove lead from your barrel.
Has anyone tried the Arktis range mat? The plastic wallet can be flipped to the underside .
V110 Sniper Range Mat - Olive Green
Anschutz barrels are very close to 15 mm outer diameter.
And not 14mm as Hubertus states above.
At our club we have made two simple carts that can carry a target. I used 4 plastic cart wheels from the DIY shop (non-steering type, fixed axle)...
I use Frog Lube on all steel parts before I go out. Done once it lasts and protects very well against rust. It sort of dries and is not sticky.
I think you won't be disappointed Rob. It's nicer to hold and to shoot than the dominator in my opinion.
And with the short 420 mm barrel you're...
This little thingy does that job Rob
2833182 ADAPTERRING FIELD TARGET LG400FT-2833182 U
An adapter ring like the one that has been around for...
Same reg for the LG400 field target and 16 joule LG300 or LG300 Dominator Rob. Thus also the same pre-chamber.
You can choose to change the pre-chamber only. Which is much cheaper at 55 Euro.
2692970 Vorkammer groß-2692970 G1
But you would need...
When you buy this 2693038 Druckregler 16 J-2693038 X1
And read this Walther LG 300 conversion to 16 Joule
You can do it yourself
This page shows how the adapter is used to fit the LG300 reg to the LG400
Installing the 16 Joule regulator on the Walther LG400
Yes, you got it right. it's internal diameter and then cord strength AKA thickness.
That's good to hear Andrew. Less work and less tools. I had not thought of that way to remove the manometer.
I think it will work better on the...
I get about 90 shots from a 200 bar fill in a standard aluminum cylinder.
As the Walther cylinders can be filled up to 300 bar I guess you can...
A quick fill is about 75 euro / 70 pound. Fill probe included. But without the tooling needed. Those were about 10 euro each.