1. Ash Bailey
2. Perry Broad
3. Ken Swift
4. Mick Boswell
5. Micky Finn
6. Lee Colvin
7. Steve O'Mara
8. Graham Cole
9. Stew Powell
All sorted now folks, thanks for the help just a small flathead screwdriver needed in the end.
Frank I need to remove the whole assembly if possible so as to lose the hinge housing that sticks out the side of the scope tube. That way I can...
Most helpful, thank you. Just need to try and make a tool now!
Anyone managed to successfully remove the integral front flip cover on a 32mm mtc connect? (Without snapping it off!) I'm wanting to fit a piece...
My windicator is about 4ft long, folds down from the underside of the barrel, and is really handy on standing shots
Jsb heavies can be a good choice for hft if your barrel likes them. They generally don't have a massive difference in poi vs. 8.4gr because they...
I've shot my Springer for the last half of the daystate series. It's been a fun, but sobering, experience. I'm going to go back to pcp for a shoot...
Mike I will be at furnace mill on Sunday, bringing my ev2 with an swfa ss 10x42 on top, which is an ideal hft spec for me. You're welcome to have...
Frank Lloyd, Vets
1. Greg Hensman - Open
2. Matt Furlong - Open
3. Dave Smith - Open
4 Kathy Thompson Open
5. Mark Thompson - Open
6. Captain Liam Todd - Open
I think due to different lens coatings and internal arrangements some scopes can be more sensitive to it than others. It all depends on the user...
The 10x44 is likely to have a bit better clarity and light transmission due to having less lenses inside, but if you like to change your...
Parallax I'm fine with, it's usually my rangefinding that lets me down a bit, which is why I'm after some better quality glass so that I can use...
If you are only going to use it for hft then I would look more at a dedicated single shot rifle, such as an air arms s400 or not, or if you can...
Arent you supposed to be drinking sangria Dan???
Thanks for all the input guys. I think I'm leaning towards the swfa because of the finer reticle and stiffer turrets, I'm going to hang on until...
I don't wash or weigh mine, but I do pour them out when I open a new tin and spray with vp90 lubricant. I find it reduces barrel fouling and so...