Get in touch with Harry Preston
Is this location correct as seems a long way from their other ground.
Try 4.53 jsb at 40 yds. Don't stick to one batch/die number. You need to find the best pellet and buy loads.
2 argos catalogues and a metal plate behind does for me.
I believe the port screws in at an angle but get hold of Chris Cundy for all your Steyr questions.
When you take out the grub screw from underneath don't drop the little nylon pip on the floor which should drop out after the grub screw is...
They put an IR on it so certain retailers are calling it a MK4. Where did you get the front flip up for it.
Did you get the manual with the pistol. If yes try page 14 and adjust the power level nearer 6ft lbs.
chrisc on here.
3D butt hook
Does most colors
BKL allen key size
Just measured one 3.49mm so a 3.5mm will do nicely.
If its the old type you need to get more spacers, if its a special with ali posts just use longer posts. A picture would be nice.
Hi Brian, which way is upside down, curved piece on the top or on the bottom. I always think the curved piece on butt hooks went on the...
At 33cm might not be high enough for full on FT rifle. depends on the width.
Yes you are correct 150mm for HFT but for FT there is no restriction.
Yes that's where it is, its M4,it only has to be loosened off. If you take it out be careful not to lose the small nylon/ptfe...
Sorry, by removing the barrel then place the shroud in position and refit barrel.
Or make a 2 piece shroud. The rear being fitted but removing the barrel.
Hi Brian, have you worked out a price yet. I would love 2 of them in the exact colors in the pic.
You need to chrono your rifle with what ever pellets you are going to use. In a tin of pellets stated as 8.44 on the tin,...